DNC Aluminum Profile Pneumatic Cylinder Tube, Aluminum Extruded Tube
Festo Standard DNC Pneumatic Cylinder Barrel Specification:
| NO | d | E | A | T |
| 1 | Φ32 | 44×44 | 32.5×32.5 | 8.2 |
| 2 | Φ40 | 51×51 | 38×38 | 11 |
| 3 | Φ50 | 64×64 | 46.5×46.5 | 17 |
| 4 | Φ63 | 75×75 | 56.5×56.5 | 26 |
| 5 | Φ80 | 93×93 | 72×72 | 28 |
| 6 | Φ100 | 111×111 | 89×89 | 35 |
| 7 | Φ125 | 134×134 | 110×110 | 55 |
Material of Aluminum Alloy Profile Tube: aluminum alloy 6063 T5
Our standard Length is 2000mm, if need other length, please freely to inform us.
Anodized surface
Accords to design FESTO
Accords to the standard ISO 6430 ISO6431 VDMA 24562 ISO15552 etc.
Used for VDMA24562 DNC Pneumatic cylinder
Chemical Composition:
| Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
| 0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Specification:
| Tension Intensity (N/mm2) | Yield Strength (N/mm2) | Ductility (%) | Surface Hardness | Internal Diameter Accuracy | Internal Roughness | Straightness | Thickness Error |
| Sb 157 | S 0.2 108 | S8 | HV 300 | H11 | < 0.6 | 1/1000 | ± 1% |
Torlerance Of Aluminium Alloy Tube:
| TORLERANCE OF ALUMINIUM ALLOY TUBE | ||||||
| DAI | TORLERANCE | |||||
| mm | H9(mm) | H10(mm) | H11(mm) | |||
| 16 | 0 | 0.043 | 0 | 0.07 | 0 | 0.11 |
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ
Q1:What is the standard of your DNC pneumatic cylinder tube’s mold?
A:Our DNC pneumatic cylinder aluminium profile mold is designed according to the VDMA2462 standard, which can also be called the ISO1552 standard. It is also the main standard for DNC cylinders on the market.
Q2:What is the VDMA2462 standard?
A:VDMA2462 is the German Machinery and Manufacturers Association (VDMA) is one of the largest trade associations in Europe. VDMA was established in 1892 and has a history of more than 110 years.
VDMA2462 standard is called ISO1552,for Pneumatic fluid power: Pneumatic Cylinders with detachable mountings, maximum rated pressure is under 1000 KPa (10 bar)
FESTO DNC DNG, SMC CP96S(D), Airtac SI pneumatic cylinder are VDMA2462 standard.
Q3:What are the advantages of DNC cylinders
A:The DNC series cylinder adopts international standards, and the advantages are very obvious: (1) Its design and structure are more modern, and compared with ordinary standard cylinders, it saves more installation space and makes the system structure more compact; (2) Installation A wide range of accessories allows the cylinder to be installed in almost any position; (3) There are many derivative models, which can provide suitable DNC cylinders for many applications.
Q4:What parts is need to make DNC cylinders?
A:The production of DNC cylinder requires DNC pneumatic cylinder barrel, C45 steel piston rod and DNC cylinder kit (cylinder end cover, piston, seal ring)
Q5:What the biggest bore size and the smallest bore size
A:The biggest bore size of DNC pneumatic cylinder tube is IDφ125MM.The smallest bore size of SC cylinder tube is IDφ32MM.
Q6:What is the length of your DNC tube
A:The standard size of our DNC cylinder tube is 2.2M,For packaging and shipping reasons, this length is better
Q7:Can you provide samples for testing
A:We are very willing to provide you with our samples, we have prepared enough samples for our customers to test
Q8:Are there have any MOQ?
A:We don’t have MOQ for DNC pneumatic cylinder profile, you can make the order according to your request
