The lever pneumatic cylinder is a standardized jig pneumatic cylinder. Using the lever clamping mechanism and principle, it is in the clamping state when the piston is stretched out. It can cooperate with the magnetic switch and related control devices to realize automatic control, so that the workpiece can be clamped or loosened to improve work efficiency.
The products are used in various special planes, automatic production lines, metallurgical tools, pneumatic fixtures and other automatic devices.
1. Diversity: Diversified non-standard products can be derived on the basis of the original, so as to meet the various requirements of customers.
2. The lever pneumatic cylinder adopts oil-containing self-lubricating bearing, so that the piston rod does not need to be lubricated.
3. Magnetic: There is a permanent magnet on the pneumatic cylinder piston, which can trigger the induction switch installed on the pneumatic cylinder to sense the movement position of the lever pneumatic cylinder.
4. Durability: The body of the lever pneumatic cylinder is made of high-quality aluminum alloy. The front and rear end covers and the pneumatic cylinder body are anodized hard, which not only has wear resistance and corrosion resistance, but also has a compact and exquisite appearance.
5. High temperature resistance: It is made of high temperature resistant sealing material, so that the lever pneumatic cylinder can work normally under the high temperature condition of 180°C.
Working principle analysis: the fulcrum of the lever pneumatic cylinder lever does not have to be in the middle, and the system that satisfies the following three points is basically a lever: fulcrum, force application point, and force receiving point.
There are also labor-saving levers and labor-intensive levers, both of which have different functions. When using the lever of the lever pneumatic cylinder, in order to save effort, the lever with the power arm longer than the resistance arm should be used; if you want to save distance, you should use the lever with the power arm shorter than the resistance arm. Therefore, the use of lever pneumatic cylinder can save effort and distance.
Post time: Jun-09-2023