Pneumatic components are components that perform work through the force generated by the pressure or expansion of the gas, that is, the components that convert the elastic energy of the compressed air into kinetic energy. Such as pneumatic pneumatic cylinders, air motors, steam engines, etc. Pneumatic components are a form of power transmission and also an energy conversion device, which uses gas pressure to transmit energy.
A pneumatic cylinder is a cylindrical metal part that guides a piston in a linear reciprocating motion. pneumatic pneumatic cylinders in the engine convert heat energy into mechanical energy through expansion; gas is compressed by pistons in the compressor pneumatic cylinder to increase its pressure. The housings of turbines, rotary piston engines, etc. are often also referred to as “pneumatic pneumatic cylinders”. pneumatic cylinder application fields: printing (tension control), semiconductor (spot welding machine, chip grinding), automation control, robot, etc.
Pneumatic cylinder is a relatively small device, but it has a wide range of uses. Only in the industrial field, there are many places where it can be used. It can play different roles in different occasions according to different needs.：
1.The pneumatic cylinder is a very efficient stamping device with outstanding functions. It quickly replaced some low-efficiency stamping equipment. Many products cannot be produced without its assistance and support, and it also saves a lot of costs for manufacturers. For example, it can be used in the manufacture of automotive parts, including the press-in of guide bushes and rubber bushes. When used as a press-in device, it is necessary to confirm the press-in method (up and down or left and right) and the press-in range, then select the appropriate bore and stroke according to the requirements, and finally confirm the correct installation method according to the installation position.
2.From the perspective of its job content alone, the guiding device is actually a very simple repetitive device. If the piston rod is equipped with a suitable guide rod, then the electrical control of the cooperating device can make the guide rod actively guide. In this way, it can be used in the assembly process of the valve plate of the car shock absorber. In the vertical direction, the valve plate stacking groove is placed below, the guide pneumatic cylinder is above it, and the valve plate pushing device is in the horizontal direction. Then, the active cooperation with the stacking slots of the valve slices can achieve the active assembly of the valve slices.
Post time: Dec-27-2022