In market sales, the product has a wide variety of types, which is actually in order to be able to better and stronger to meet the application requirements of different customers. At present, there are general pneumatic pneumatic cylinders, pulse damper pneumatic pneumatic cylinders, destructive pneumatic pneumatic cylinders, rodless pneumatic pneumatic cylinders and so on. So, what are its working characteristics? The speed of the hydraulic pneumatic cylinders in the device is continuously fluctuating while the equipment is in operation. However, the speed that everyone usually refers to refers to the average speed of the hydraulic pneumatic cylinder.
But in order to better meet your application requirements, you must establish the output force of the device in advance. In fact, for pneumatic cylinder products, the formula for calculating the basic knowledge output force is the same as that of hydraulic pressure. Therefore, we can calculate according to the method of calculating the output force of the hydraulic pneumatic cylinder. In addition, the actual output force of the device is usually damaged by many factors, especially the damage caused by sliding friction. For this, everyone must pay more attention.
In addition, people often continue to hear the index of the air supply of the equipment again. In fact, the air supply in short refers to the consumption of the air pneumatic cylinder under the condition of continuous fitness exercise. Compressed air volume. Under normal circumstances, the specifications of the air supply volume are not much related to the characteristics of the equipment. The key to this data information is an important reference basis provided in the case of selecting the displacement of the air compressor.
In general, the product of the relevant pneumatic cylinder includes many difficulties. As customers, we must grasp some relevant information in our daily work, which is likely to be beneficial to everyone and can better use the equipment. , In addition, it is also conducive to improving the work efficiency of everyone.
Advantages of pneumatic cylinders:
(1) The requirements for the application person are lower. The basic concept and structure of the pneumatic cylinder are simple, which is conducive to the installation and maintenance of equipment, and does not have high requirements for the user. The electric pneumatic cylinder is different. Construction project workers must have certain professional skills in electrical equipment and equipment, otherwise it is very likely to be damaged due to wrong operation.
(2) The output force is large. The output force of the pneumatic cylinder is proportional to the square meter of the pneumatic cylinder diameter; and the output force of the electric pneumatic cylinder is related to three factors, the pneumatic cylinder diameter, the output power of the motor and the pitch of the ball screw. The larger the pneumatic cylinder diameter and the output power, the smaller the pitch. The greater the output force. A pneumatic cylinder with a pneumatic cylinder diameter of 50mm can theoretically output more than 2000N. For electric pneumatic cylinders with the same pneumatic cylinder diameter, although the products of different companies are different, most of them do not exceed 1000N. Obviously, the pneumatic cylinder has more advantages in terms of output force.
(3) Strong adaptability. The pneumatic cylinder can work normally in high temperature and low temperature geographical environment and has professional ability of anti-fouling and waterproof, and can be used in a variety of harsh environments. The electric pneumatic cylinder has high requirements on the geographical environment and poor adaptability due to the fact that it has many prefabricated components of electrical equipment.
Post time: Aug-31-2022