The mini pneumatic cylinder generally refers to a pneumatic cylinder with a relatively small bore and stroke, and is a pneumatic cylinder with a relatively small shape. The pressure energy of compressed air is converted into mechanical energy, and the driving mechanism makes linear reciprocating motion, swinging and rotating motion.
The function of the mini pneumatic cylinder: convert the pressure energy of compressed air into mechanical energy, and the drive mechanism makes linear reciprocating motion, swinging and rotating motion.
1. The mini pneumatic cylinder is a cylindrical metal part that guides the stainless steel piston rod to perform linear reciprocating motion in the air cylinder barrel. The working fluid converts heat energy into mechanical energy through expansion in the pneumatic cylinder of the engine; the gas is compressed by the China hard chrome piston rod in the pneumatic cylinder of the compressor to increase the pressure.
2. The casings of turbines, rotary piston rod engines, etc. are usually also called “pneumatic cylinders”. The application fields of the pneumatic cylinder: printing (tension control), semiconductor (spot welding machine, chip grinding), automation control, robot and so on.
Installation method of mini pneumatic cylinder
1.The free installation method refers to using the thread in the pneumatic cylinder body to screw into the machine body for fixed installation without using the installation accessories; or using the thread outside the China aluminum cylinder barrel to fix the pneumatic cylinder on the machine with nuts; it can also be installed through the end The screw holes of the cover are fixed to the machine with screws.
2.The tripod type installation method, denoted by LB, refers to the use of an L-shaped mounting tripod to match the screw holes at the front end cover with screws for installation and fixation. The tripod can withstand a large overturning moment and can be used for load Where the direction of movement is consistent with the axis of the piston rod.
3. Flange type installation can be divided into front flange type and rear flange type. The front flange type uses flanges and screws to fix the pneumatic cylinder at the front end cover, and the rear flange type refers to the installation method at the rear end cover. The flange is fixed with screws, and it is also suitable for occasions where the direction of load movement is consistent with the axis of the hard chrome plated rod.
Precautions for use:
A magnetic switch installation bracket is required, and the installation methods of the magnetic switch are divided into steel belt installation and rail installation.
It is necessary to connect the pneumatic cylinder piston rod and the moving parts through the floating joint, so that the moving parts can move smoothly and stably, and prevent jamming.
It is best to leave a margin in the selection of the pneumatic cylinder stroke.
Post time: Mar-24-2023