During the operation of the pneumatic cylinder (made by aluminum cylinder tube), it mainly refers to the internal combustion or external combustion engine, which makes it piston in it. To a certain extent, it allows it to be recovered. In the process of carrying out the system Compositions such as end cover, piston, and pneumatic cylinder set.
The pneumatic cylinder (made by aluminium pneumatic cylinder tube) can effectively do the two categories of re -line and swinging. During the work process, the oil mist in its air compression is moisturized to the piston. In the pressure transmission Permanent execution elements that can be converted into mechanical energy.
1. Single -functional pneumatic cylinder: During the operation of the operation, there is only a piston rod at the end of the operation. From the piston side, the gas supply can generate air pressure. The air pressure promotes the thrust of the piston to extend, and it returns by spring or self -weight.
2. Dual -function pneumatic cylinder: more gas supply from both sides of the piston, and output force in one or two directions.
3. Valve -type pneumatic cylinder: Use a valve sheet to replace the piston, only the output force in one orientation, reset it with a twist spring. It has good sealing performance, but its itinerary is short.
The pneumatic cylinder is called its swinging pneumatic cylinder in the pneumatic cylinder of its re -swinging. In the process of launching the system, it is mainly separated by the inner wall of the leaves. The axis will efficiently do swinging movements, and its swing angle is lower than 280 °. In addition, there are rotating pneumatic cylinders, gas liquid vibration tanks and step pneumatic cylinder.
Post time: Oct-21-2022