News
-
How to Remove and Replace a Pneumatic Cylinder’s Seal
Install and dismantle the pneumatic cylinder： (1) When installing and removing the pneumatic cylinder, be sure to handle it with care to avoid damage to the pneumatic cylinder. If it exceeds a certain volume or weight, it can be hoisted. (2) The sliding part of the pist...Read more -
Precautions for the use of rodless pneumatic cylinders
Precautions for use and installation： 1.First, use clean and dry compressed air. The air must not contain organic solvent synthetic oil, salt, corrosive gas, etc., to prevent the pneumatic cylinder and valve from malfunctioning. Before installation, the connecting pipin...Read more -
Piston Rod Function
The C45 piston rod is a connecting part that supports the work of the piston. It is a moving part with frequent movement and high technical requirements, which is mostly used in the moving parts of the oil cylinder and the pneumatic cylinder. Taking the pneumatic cylinde...Read more -
What are the reasons for insufficient Pneumatic cylinder pressure?
1. Cause of failure 1) The side clearance and open-end clearance of the piston ring are too large, or the labyrinth route of the gas ring opening is shortened, or the sealing of the piston ring; after the surface is worn, its sealing performance becomes poor. 2) Excessiv...Read more -
What is the structure of the Air cylinder?
From the analysis of the internal structure, the key components usually included in the cylinder are: Pneumatic Cylinder Kits (Pneumatic cylinder barrel, pneumatic end cover, pneumatic piston, piston rod and seal). The inner diameter of the cylinder barrel represents th...Read more -
Use of rodless pneumatic cylinders
The working principle of the rodless pneumatic cylinder is the same as that of the ordinary pneumatic cylinder, but the external connection and sealing form are different. Rodless pneumatic cylinders have pistons where as do not have piston rods. The piston is installed ...Read more -
Introduction to rodless pneumatic cylinders
Rodless pneumatic cylinder refers to a pneumatic cylinder that uses a piston to directly or indirectly connect an external actuator to make it follow the piston to achieve reciprocating motion. The biggest advantage of this type of cylinder is to save installation space,...Read more -
5 aspects teach you how to choose a high-quality cylinder
1. Selection of cylinder type Correctly select the type of cylinder according to the working requirements and conditions. If the cylinder is required to reach the stroke end without impact phenomenon and impact noise, a buffer pneumatic cylinder (made by aluminum tube ) ...Read more -
Do not forget the following methods when using pneumatic components daily
I believe that everyone is no stranger to pneumatic components. When we use it daily, don't forget to maintain it, so as not to affect the long-term use. Next, Xinyi pneumatic manufacturer will briefly introduce several maintenance methods for maintaining components. The...Read more -
The performance advantage of the pneumatic cylinder and its application
In market sales, the product has a wide variety of types, which is actually in order to be able to better and stronger to meet the application requirements of different customers. At present, there are general pneumatic pneumatic cylinders, pulse damper pneumatic pneumat...Read more -
Pneumatic cylinder block crack inspection and repair method
In order to know the condition of the pneumatic cylinder block in time, it is generally necessary to use a hydraulic test to detect whether it has cracks. The actual method is to first connect the pneumatic cylinder cover (pneumatic cylinder kits) and the pneumatic cylin...Read more -
THE SOLUTION TO THE FAILURE OF THE COMPACT PNEUMATIC CYLINDER
1. The cylinder has compressed air entering, but no output. In view of this situation, the possible reasons are as follows: the upper and lower membrane chambers are connected due to the leakage of the diaphragm, the upper and lower pressures are the same, and the actuat...Read more