Airtac is a world-renowned large-scale enterprise group specializing in the production of various types of pneumatic equipment, dedicated to providing customers with pneumatic control components, pneumatic actuators, air source processing components, pneumatic auxiliary components and other pneumatic materials that meet their needs. Services and solutions, creating long-term value and potential growth for customers Airtac pneumatic actuator is an energy conversion device, which converts the pressure energy of compressed air into mechanical energy, and the drive mechanism realizes linear reciprocating motion, swing, and rotation. or shock action. Pneumatic actuators are divided into two categories: pneumatic cylinders and air motors. Pneumatic cylinders provide linear motion or swing, output force and linear velocity or swing angular displacement. Air motors are used to provide continuous rotary motion, output torque and speed
Airtac pneumatic control components are used to adjust the pressure flow and direction of compressed air to ensure that the actuator works normally according to the prescribed procedures. Pneumatic control components can be divided into pressure control, flow control and directional control valve according to their functions
Airtac common channel double acting pneumatic cylinder, below is the pneumatic cylinder kits:
3. Piston
4. Pneumatic cylinder tube
5. Guide sleeve
6. Dust ring
7. Front cover
8. Breath back
9. Enchanter
10. Piston rod
11. Wear ring
12. Sealing ring
13. Backend
The most commonly used single-piston rod double-acting Pneumatic cylinder in the pneumatic system is composed of a pneumatic cylinder barrel, a piston, a piston rod, a front end cover, a rear end cover and a seal. The interior of the double-acting pneumatic cylinder is divided into two chambers by the piston. When the compressed air is input from the rodless cavity, the rod cavity is exhausted, and the force formed by the pressure difference between the two chambers of the pneumatic cylinder acts on the piston to overcome The resistance load pushes the piston to move, so that the piston rod extends; when there is a rod cavity for intake, and when there is no rod cavity for exhaust, the piston rod is retracted. If there is a rod cavity and a rodless cavity alternately for air intake and exhaust, the piston realizes reciprocating linear motion.
Classification of Airtac Air pneumatic cylinders There are many types of Airtac air pneumatic cylinders, which are generally classified according to the structural characteristics, functions, driving methods or installation methods of the air pneumatic cylinders. The method of classification is also different. According to the structural characteristics, the air pneumatic cylinder is mainly divided into two types: piston type pneumatic cylinder and desert type pneumatic cylinder. According to the form of motion, it is divided into two categories: linear motion pneumatic cylinder and swing pneumatic cylinder.
Airtac fixed pneumatic cylinder The pneumatic cylinder is installed on the body and fixed, there is a seat type and a flange type Airtac pin type pneumatic cylinder The pneumatic cylinder block can move at a certain angle around a fixed axis, there are shape type and trunnion type) The rotary pneumatic cylinder block is fixed at the end of the main shaft of the machine tool for high-speed rotation: this type of pneumatic cylinder is commonly used in the pneumatic chuck on the sub-machine tool to realize the automatic clamping of the workpiece.
Post time: Jul-11-2022