TCM-A/TCM-B SERIES GUIDE ROD CHINA ALUMINUM ALLOY TUBE
TCM-A (φ12-80) Series Cylinder Tube
|
No |
d |
d1-2 |
A |
B |
C |
D |
E |
|
1 |
φ12 |
φ10 |
58 |
41 |
37 |
9 |
26 |
|
2 |
φ16 |
φ12.5 |
64 |
46 |
38 |
10.5 |
30 |
|
3 |
φ20 |
φ14.5 |
83 |
54 |
44 |
12.5 |
36 |
|
4 |
φ25 |
φ18 |
93 |
64 |
50 |
15 |
42 |
|
5 |
φ32 |
φ22.5 |
112 |
78 |
63 |
19.5 |
48 |
|
6 |
φ40 |
φ22.5 |
120 |
86 |
72 |
25 |
54 |
|
7 |
φ50 |
φ27.5 |
148 |
110 |
92 |
33 |
64 |
|
8 |
φ63 |
φ27.5 |
162 |
124 |
110 |
34 |
78 |
|
g |
φ80 |
φ34 |
202 |
156 |
140 |
48 |
91.5 |
TCM-B (φ12-63) Series Cylinder Tube
|
NO |
d |
2-d1 |
A |
B |
C |
D |
E |
|
1 |
φ12 |
φ10 |
58 |
41 |
37 |
9 |
26 |
|
2 |
φ16 |
φ13 |
64 |
46 |
38 |
10.5 |
30 |
|
3 |
φ20 |
φ17 |
83 |
54 |
44 |
12.5 |
36 |
|
4 |
φ25 |
φ18 |
93 |
64 |
50 |
15 |
42 |
|
5 |
φ32 |
φ22.5 |
112 |
78 |
63 |
19.5 |
48 |
|
6 |
φ40 |
φ22.5 |
120 |
86 |
72 |
25 |
54 |
|
7 |
φ50 |
φ27 |
148 |
110 |
92 |
33 |
64 |
|
8 |
φ63 |
φ27 |
162 |
124 |
110 |
34 |
78 |
Material of Aluminum Alloy Profile Aluminum pneumatic cylinder tube: aluminum alloy 6063 T5
Our standard Length is 2000mm, if need other length, please freely to inform us.
Anodized surface: Inner tube-15±5μm Outer tube-10±5μm
Accords to design FESTO, SMC, Airtac, Chelic etc.
Accords to the standard ISO 6430 ISO6431 VDMA 24562 ISO15552 etc.
Used for standard cylinder, compact cylinder, mini cylinder, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper etc. Also for some special cylinders.
Chemical Composition:
|
Chemical Composition |
Mg |
Si |
Fe |
Cu |
Mn |
Cr |
Zn |
Ti |
|
0.81 |
0.41 |
0.23 |
<0.08 |
<0.08 |
<0.04 |
<0.02 |
<0.05 |
Specification:
| Tension Intensity (N/mm2) | Yield Strength (N/mm2) | Ductility (%) | Surface Hardness | Internal Diameter Accuracy | Internal Roughness | Straightness | Thickness Error |
| Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | < 0.6 | 1/1000 | ± 1% |
Torlerance Of Aluminium Alloy Tube:
| TORLERANCE OF ALUMINIUM ALLOY TUBE | ||||||
| Bore Size | TORLERANCE | |||||
| mm | H9(mm) | H10(mm) | H11(mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ:
Q1: What is the TCM model?
A: Product feature
1. JIS standard is implemented
2. Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.
3. Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required The air intake is optional and it is convenient to install.
4. The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See PA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation.
5. Options of switch mounting with provision 4 mounting slots.
6. Special design of main body provides multi-mount;
Q2: If we buy the TCM, is it possible with anodizing for Aluminum Air Cylinder Tubes?
A: This Pneumatic Cylinder is not recommended to be oxidized, because the customer needs to cut it himself and then process it and then perform oxygen treatment after buying it.
Q3: What is the length if we order Pneumatic Cylinder Tube Pipe?
A:The length is 2 meter.
Q4: What is the delivery time about Aluminum Profile For Air Cylinder?
A: ☆If customized tubes, time need 50-60 working days, but if for the standard tubes, our delivery time is 15-20 working days.
