MGP Series Guide Rod Aluminum Cylinder Tube
MGPM Series Drawing
NO |
d |
2-d1 |
E |
F |
T |
S |
H |
H1 |
A |
B |
1 |
Φ12 |
Φ9.5 |
58 |
50 |
37 |
25 |
6 |
3 |
41 |
4.4 |
2 |
Φ16 |
Φ11 |
64 |
50 |
38 |
30.2 |
4.8 |
2 |
46 |
3.7 |
3 |
Φ20 |
Φ13.5 |
83 |
60 |
44 |
36.2 |
7.8 |
3.5 |
54 |
5.5 |
4 |
Φ25 |
Φ17.5 |
93 |
68 |
54 |
42 |
8 |
3.5 |
64 |
5.5 |
5 |
Φ32 |
Φ21 |
112 |
75 |
63 |
48 |
8 |
4 |
78 |
6.5 |
6 |
Φ4O |
Φ21 |
120 |
89 |
72 |
54 |
11 |
5.5 |
86 |
6.7 |
7 |
Φ50 |
Φ26.5 |
148 |
118 |
92 |
64 |
11.8 |
7.8 |
110 |
8.3 |
8 |
Φ63 |
Φ26.5 |
162 |
143 |
110 |
78 |
17 |
10 |
124 |
11 |
9 |
Φ80 |
Φ31.5 |
202 |
180 |
140 |
92 |
22 |
11 |
156 |
13 |
FAQ:
Q1: What is the MGPM model?
A:☆ It is SMC standard. The bore size is from Dia12mm to Dia100mm.
☆ Due to technological updates, this magnetic switch slot has changed from square to round.
☆ MGPM series thin guide rod cylinders are compact in structure, small, and do not take up space for installation. They can be installed in relatively small spaces; they can be fixed and installed from the bottom or side of the cylinder with screws, which is convenient for installation; the guide rod is thick and resistant Strong lateral load capacity, can bear larger lateral load, and can be used for pushing out and lifting the workpiece on the conveyor line; the guide rod structure has strong torque resistance.
☆ The MGP guide rod Pneumatic Cylinder is a Pneumatic Cylinder that combines the piston rod and the two guide rods parallel to the piston rod through the end plate. Therefore, the most significant feature of the MGP series guide rod Pneumatic Cylinder is the high non-rotation accuracy, located at ±0.04°~±0.08° , Suitable for machinery that requires high-precision guidance.
Q2: If we buy the MGPM, is it possible with anodizing for Pneumatic Cylinder Tube Pipe?
A: This Pneumatic Cylinder is not recommended to be oxidized, because the customer needs to cut it himself and then process it and then perform oxygen treatment after buying it.
Q3: What is the length if we order Honed Aluminum Cylinder Tubing?
A:The length is 2 meter.
Q4: What is the delivery time of Profiles For Pneumatic Cylinders?
A: ☆If customized tubes, time need 50-60 working days, but if for the standard tubes, our delivery time is 15-20 working days.