Factory Supply Stainless Steel Tie Rods - 304 Stainless Steel Pneumatic cylinder Piston Rod, Stainless Steel Shaft – Autoair
Factory Supply Stainless Steel Tie Rods - 304 Stainless Steel Pneumatic cylinder Piston Rod, Stainless Steel Shaft – Autoair Detail:
Introduce
The rods first undergo precision milling and processing, and are then put through grind surface chromium treatment, allowing a surface precision level of f8, and a surface hardness reaching HV850 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.
Application
Directly for cylinder, cylinder, shock absorber piston rod, and is widely used in textile printing and dyeing, printing machinery, guide rail, die-casting machine, injection molding machine guide rod, the ejector and other mechanical products of guide pin and four-column press guide post, fax machines, printers and other modern office machinery guide shaft and some precision slender shaft for the parts industry products.
Product Details
| specifications | φ6-φ12 | φ16-φ25 | φ30-φ50 | φ55-φ100 | φ105-φ1200 |
| length | 200-2000 | 200-3000 | 200-5000 | 200-10000 | 1000-10000 |
| Surface roughness | Ra＜0.2 | ||||
| Surface Treatment of hardness | HRC6 | Straightness | 0.15/1000mm | ||
| Circle of Tolerance | GB1184 9 Grade | Chrome thickness | According to user requirements | ||
| Full-length size Tolerance | GB1100IT Grade | Material | According to user requirements | ||
| Axis of hardness | HB220-280 | ||||
| Availability Status | No surface treatment, chrome or nickel-phosphorus plating on the surface, salt spray nitriding on the surface | ||||
| CHEMICAL COMPOSITION(%) | |||||||
| Material | C% | Mn% | Si% | S% | P% | V% | Cr% |
| <= | |||||||
| CK45 | 0.42-0.50 | 0.50-0.80 | 0.17-0.37 | 0.035 | 0.035 | ||
| ST52 | <=0.22 | <=1.6 | <=0.55 | 0.035 | 0.035 | 0.10-0.20 | |
| 20MnV6 | 0.16-0.22 | 1.30-1.70 | 0.1-0.50 | 0.035 | 0.035 | ||
| 42CrMo4 | 0.38-0.45 | 0.60-0.90 | 0.15-0.40 | 0.03 | 0.03 | 0.90-1.20 | |
| 4140 | 0.38-0.43 | 0.75-1.0 | 0.15-0.35 | 0.04 | 0.04 | 0.80-1.10 | |
| 40Cr | 0.37-0.45 | 0.50-0.80 | 0.17-0.37 | 0.80-1.10 | |||
| Diameter | Weight | Tolerance | Tolerance | Tolerance |
| mm | Kg/m | f7（μm） | f8(μm） | h6(μm） |
| ￠6 | 0.22 | -10–22 | -10–28 | 0–9 |
| ￠8 | 0.39 | -13–28 | -13–35 | 0–9 |
| ￠10 | 0.62 | -13–28 | -13–35 | 0–11 |
| ￠12 | 0.89 | -16–34 | -16–43 | 0–11 |
| ￠16 | 1.58 | -16–34 | -16–43 | 0–11 |
| ￠18 | 2.00 | -16–34 | -16–43 | 0–13 |
| ￠20 | 2.47 | -20–41 | -20–53 | 0–13 |
| ￠22 | 2.99 | -20–41 | -20–53 | 0–13 |
| ￠25 | 3.86 | -20–41 | -20–53 | 0–13 |
| ￠28 | 4.84 | -20–41 | -20–53 | 0–13 |
| ￠30 | 5.55 | -20–41 | -20–53 | 0–16 |
| ￠32 | 6.32 | -25–50 | -25–64 | 0–16 |
| ￠36 | 8.00 | -25–50 | -25–64 | 0–16 |
| ￠38 | 8.91 | -25–50 | -25–64 | 0–16 |
| ￠40 | 9.87 | -25–50 | -25–64 | 0–16 |
Chemical composition table
FAQ:
Q1:What is the stainless steel pneumatic cylinder hard chrome rods?
A:Stainless steel hard chrome rods are mainly used for hydraulic and pneumatic piston rods for engineering machinery, automobile manufacturing, guide posts for plastic machinery, rollers for packaging machinery, printing machinery, textile machinery, axis for conveying machinery, and linear optical axis for linear motion. . The piston rod is processed by rolling. Because the surface layer has residual surface stress, it helps to close the micro cracks on the surface and hinder the expansion of corrosion.
Q2:What are the characteristics of stainless steel pneumatic cylinder piston rod?
A:The stainless steel pneumatic cylinder piston rod is processed by rolling. Because the surface layer has residual surface stress, it helps to close the surface micro cracks and hinder the expansion of corrosion.
Thereby improving the surface corrosion resistance, and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. Through roll forming, a cold work hardened layer is formed on the rolled surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the cylinder rod surface and avoiding burns caused by grinding. After rolling, the surface roughness value is reduced, which can improve the mating properties. At the same time, the friction damage to the sealing ring or the sealing element during the movement of the cylinder rod piston is reduced, and the overall service life of the pneumatic cylinder is improved.
Q3:What are the advantages of 304 stainless steel piston rod
A:Stainless steel 304 is a material used in the production of piston rods. It is resistant to weak corrosive media such as air, steam, and water. Commonly used materials are 304, 316. The weldability, polishability, heat resistance, corrosion resistance, and corrosion resistance of these materials are relatively good. Through precision cold drawing, precision grinding,high precision polishing and other processes, the stainless steel piston rod manufactured by the All technical indicators meet and exceed national standards, so they are often used in oil cylinders,air cylinders,and shock absorbers.
Q4:What is the rolling process of the stainless steel pneumatic cylinder piston rod?
A:The piston rod of the stainless steel pneumatic cylinder is processed by rolling. Because the surface layer has residual surface stress, it helps to close the surface micro cracks and hinder the expansion of corrosion.
Thereby improving the surface corrosion resistance, and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. Through roll forming, a cold work hardened layer is formed on the rolled surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the cylinder rod surface and avoiding burns caused by grinding. After rolling, the surface roughness value is reduced, which can improve the mating properties. At the same time, the friction damage to the sealing ring or the sealing element during the movement of the cylinder rod piston is reduced, and the overall service life of the pneumatic cylinder is improved.
Q5:What are the characteristics of the stainless steel piston rod of the pneumatic cylinder?
A:1.Excellent corrosion resistance, good corrosion resistance in the production process of pulp and paper. Moreover, 304 stainless steel is also resistant to corrosion by the ocean and corrosive industrial atmosphere.
2.In the high temperature environment, 304 stainless steel has good oxidation resistance. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 304 stainless steel has a wide range of uses.
Product detail pictures:
Related Product Guide:
We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Factory Supply Stainless Steel Tie Rods - 304 Stainless Steel Pneumatic cylinder Piston Rod, Stainless Steel Shaft – Autoair , The product will supply to all over the world, such as: Puerto Rico, Mongolia, Zurich, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products we offer, effective and satisfying consultation service is supplied by our specialist after-sale service group. Solution lists and detailed parameters and any other info weil be sent to you timely for the inquiries. So please get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we are going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Ada from Lesotho - 2018.09.23 17:37
Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
By Renata from Manila - 2017.05.21 12:31
