Dual Rod Air Cylinder Aluminum Tube
Before the pneumatic cylinder is connected to the pipeline, the dirt in the pipeline must be removed to prevent the debris from entering the pneumatic cylinder
The lateral load received by the pneumatic cylinder during operation should not exceed the allowable value, and the instrument maintains the normal operation and service life of the pneumatic cylinder
Anti-freezing measures should be taken for the pneumatic cylinder in a low temperature environment to prevent the moisture in the system from freezing
If the pneumatic cylinder is not used for a long time after disassembly, attention should be paid to the surface rust prevention, and the air inlet and exhaust ports should be equipped with dust-proof clogging caps. Due to the high precision of product manufacturing and guiding, please do not disassemble the pneumatic cylinder fixing block or pneumatic cylinder head by yourself.
TN Series
| NO | d | E | A |
| 1 | Φ10 | 42 | 18 |
| 2 | Φ16 | 54 | 24 |
| 3 | Φ20 | 62 | 28 |
| 4 | Φ25 | 73 | 34 |
| 5 | Φ32 | 96 | 42 |
| 6 | Φ40 | 111 | 56 |
CXS Series
| NO | d | E | A | T | B | b | D |
| 1 | Φ10 | 46.4 | 20 | 33.8 | 17.3 | 7.3 | 25.8 |
| 2 | Φ16 | 58.5 | 25 | 41.2 | 20.3 | 10 | 33.4 |
| 3 | Φ20 | 64.4 | 28 | 53 | 25.3 | 12.8 | 37.5 |
| 4 | Φ25 | 80.4 | 35 | 64 | 30.3 | 15.3 | 45.5 |
| 5 | Φ32 | - | - | P IS refer to belou darwing | |||
CXS-J Series
| NO | d | H | B | A | E | C |
| 1 | Φ6 | 32 | 13.4 | 16 | 10.6 | 8 |
| 2 | Φ10 | 42 | 15 | 20 | 16 | 9 |
| 3 | Φ15 | 54 | 19 | 25 | 45 | 13 |
| 4 | Φ20 | 62 | 24 | 29 | 51 | 18 |
| 5 | Φ25 | 73 | 29 | 35 | 59 | 23 |
| 6 | Φ32 | 94 | 37 | 45 | 73 | 31 |
STM Series
| NO | d | E | X | T | D | H | B | C | S |
| 1 | Φ10 | 44 | 16 | 17 | 8 | 10 | 8 | 1.5 | 18 |
| 2 | Φ16 | 59 | 22 | 23 | 11 | 13 | 14 | 1.5 | 30.2 |
| 3 | Φ20 | 68 | 25 | 26 | 13 | 16 | 17 | 1.5 | 35 |
| 4 | Φ25 | 82 | 31 | 32 | 16 | 18 | 15 | 5 | 40 |
FAQ:
Q1: What is dual rod pneumatic cylinder?
A: The dual rod pneumatic cylinder is the function of two piston rods in the pneumatic cylinder performing linear reciprocating motion in the pneumatic cylinder to generate air pressure, and the air pressure pushes the piston to generate thrust and extend into mechanical energy. Application areas of pneumatic cylinder s: printing, semiconductors, automation control, robots, etc.
Q2: Why use the double piston rod for the pneumatic cylinder?
A: The double-piston rod structure makes the pneumatic cylinder have good anti-bending and anti-torsion performance, and can withstand large moving loads and lateral loads.
There are anti-collision pad devices at both ends, which can effectively slow down the impact speed and prolong the service life.
Q3: Which models pneumatic cylinder with double piston rod?
A: Dual rod pneumatic cylinder have SMC standard CXSM, Airtac standard TN, Airtac standard STM etc.
Q4: Is there same as standard with SMC or Airtac?
A: Sure, we are accords to their standard for production.
Q5: What to pay attention to when using the pneumatic cylinder ?
A: Under high temperature or corrosive conditions, high temperature resistant or corrosive pneumatic cylinder s should be used.
