TN/TR/TCM/CXS DUAL ROD AIR CYLINDER ALUMINUM TUBE
TN (φ10-50) Series Dual Rod Cylinder Tube
|
No |
d |
E |
A |
B |
|
1 |
φ10 |
42 |
18 |
17 |
|
2 |
φ16 |
54 |
24 |
21 |
|
3 |
φ20 |
62 |
28 |
25 |
|
4 |
φ25 |
73 |
34 |
30 |
|
5 |
φ32 |
96 |
42 |
40 |
|
6 |
φ40 |
112 |
56 |
48 |
|
7 |
φ50 |
135.5 |
60.5 |
58 |
TR (φ6-32) Series Dual Rod Cylinder Tube
| NO | d | E | A | T | B | b | D |
| 1 | Φ10 | 46.4 | 20 | 33.8 | 17.3 | 7.3 | 25.8 |
| 2 | Φ16 | 58.5 | 25 | 41.2 | 20.3 | 10 | 33.4 |
| 3 | Φ20 | 64.4 | 28 | 53 | 25.3 | 12.8 | 37.5 |
| 4 | Φ25 | 80.4 | 35 | 64 | 30.3 | 15.3 | 45.5 |
| 5 | Φ32 | - | - | P IS refer to belou darwing | |||
CXS (φ10-32) Series Cylinder Tube
|
No |
d |
E |
A |
T |
B |
b |
D |
H |
|
1 |
φ10 |
46 |
20 |
33.8 |
17 |
7.1 |
25.8 |
38 |
|
2 |
φ15 |
58 |
25 |
41.2 |
20 |
10 |
33.4 |
- |
|
3 |
φ20 |
64 |
28 |
53 |
25 |
12.5 |
37.5 |
52.5 |
|
4 |
φ25 |
80 |
35 |
64 |
30 |
15 |
45.5 |
67 |
|
5 |
φ32 |
98 |
48 |
76 |
38 |
19 |
57.5 |
81.2 |
CXS-J (φ6-32) Series Dual Rod Cylinder Tube
|
NO |
d |
H |
B |
A |
E |
C |
|
1 |
φ6 |
32 |
13.4 |
16 |
10.6 |
8 |
|
2 |
φ10 |
42 |
15 |
20 |
16 |
g |
|
3 |
φ15 |
54 |
19 |
25 |
45 |
13 |
|
4 |
φ20 |
62 |
24 |
29 |
51 |
18 |
|
5 |
φ25 |
73 |
29 |
35 |
59 |
23 |
|
6 |
φ32 |
94 |
37 |
45 |
73 |
31 |
Material of Aluminum Alloy Profile Aluminum pneumatic cylinder tube: aluminum alloy 6063 T5
Our standard Length is 2000mm, if need other length, please freely to inform us.
Anodized surface: Inner tube-15±5μm Outer tube-10±5μm
Accords to design FESTO, SMC, Airtac, Chelic etc.
Accords to the standard ISO 6430 ISO6431 VDMA 24562 ISO15552 etc.
Used for standard cylinder, compact cylinder, mini cylinder, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper etc. Also for some special cylinders.
Chemical Composition:
|
Chemical Composition |
Mg |
Si |
Fe |
Cu |
Mn |
Cr |
Zn |
Ti |
|
0.81 |
0.41 |
0.23 |
<0.08 |
<0.08 |
<0.04 |
<0.02 |
<0.05 |
Specification:
| Tension Intensity (N/mm2) | Yield Strength (N/mm2) | Ductility (%) | Surface Hardness | Internal Diameter Accuracy | Internal Roughness | Straightness | Thickness Error |
| Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | < 0.6 | 1/1000 | ± 1% |
Torlerance Of Aluminium Alloy Tube:
| TORLERANCE OF ALUMINIUM ALLOY TUBE | ||||||
| Bore Size | TORLERANCE | |||||
| mm | H9(mm) | H10(mm) | H11(mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ:
Q1: What is dual rod pneumatic cylinder?
A: The dual rod pneumatic cylinder is the function of two piston rods in the pneumatic cylinder performing linear reciprocating motion in the pneumatic cylinder to generate air pressure, and the air pressure pushes the piston to generate thrust and extend into mechanical energy. Application areas of pneumatic cylinder s: printing, semiconductors, automation control, robots, etc.
Q2: Why use the double piston rod for the pneumatic cylinder?
A: The double-piston rod structure makes the pneumatic cylinder have good anti-bending and anti-torsion performance, and can withstand large moving loads and lateral loads.
There are anti-collision pad devices at both ends, which can effectively slow down the impact speed and prolong the service life.
Q3: Which models pneumatic cylinder with double piston rod?
A: Dual rod pneumatic cylinder have SMC standard CXSM, Airtac standard TN, Airtac standard STM etc.
Q4: Is there same as standard with SMC or Airtac?
A: Sure, we are accords to their standard for production.
Q5: What to pay attention to when using the pneumatic cylinder ?
A: Under high temperature or corrosive conditions, high temperature resistant or corrosive pneumatic cylinder s should be used.
