Pneumatic Cylinder Tube, 6063 Aluminum Round Honed Tube
The most common pneumatic cylinder aluminum alloy round pneumatic cylinder tube, the raw material is 6063-T5 alloy. Aluminum alloys have good corrosion resistance, formability and weldability. The inner and outer walls are anodized, and with good outlook
Specification (mm):
|
ID d |
OD D |
Thickness |
|
Φ16 |
Φ20 |
2 |
|
Φ20 |
Φ25 |
2.5 |
|
Φ25 |
Φ30 |
2.5 |
|
Φ32 |
Φ37 |
2.5 |
|
Φ40 |
Φ45 |
2.5 |
|
Φ50 |
Φ55 |
2.5 |
|
Φ63 |
Φ68 |
2.5 |
|
Φ63 |
Φ69 |
3 |
|
Φ70 |
Φ76 |
3 |
|
Φ80 |
Φ86 |
3 |
|
Φ80 |
Φ87 |
3.5 |
|
Φ100 |
Φ106 |
3 |
|
Φ100 |
Φ107 |
3.5 |
|
Φ125 |
Φ133 |
4 |
|
Φ150 |
Φ160 |
5 |
|
Φ160 |
Φ170 |
5 |
|
Φ180 |
Φ190 |
5 |
|
Φ200 |
Φ210 |
5 |
|
Φ250 |
Φ262 |
6 |
Inch Size table list
|
ID in Inch |
O.D. in MM |
I.D.in MM |
Thickness in MM |
|
1 |
29 |
25.4 |
1.8 |
|
30 |
25.4 |
2.3 |
|
|
1.25 |
36 |
31.75 |
2.125 |
|
37 |
31.75 |
2.625 |
|
|
1.5 |
42 |
38.1 |
1.95 |
|
1.75 |
49 |
44.45 |
2.275 |
|
50 |
44.45 |
2.775 |
|
|
2 |
55 |
50.8 |
2.1 |
|
56 |
50.8 |
2.6 |
|
|
56.8 |
50.8 |
3 |
|
|
2.25 |
62.5 |
57.15 |
2.675 |
|
2.5 |
68 |
63.5 |
2.25 |
|
69 |
63.5 |
2.75 |
|
|
3 |
81 |
76.2 |
2.4 |
|
4 |
106.4 |
101.6 |
2.4 |
Material of Aluminum Alloy Profile Aluminum pneumatic cylinder tube: aluminum alloy 6063 T5
Our standard Length is 2000mm, if need other length, please freely to inform us.
Anodized surface: Inner tube-15±5μm Outer tube-10±5μm
Accords to design FESTO, SMC, Airtac, Chelic etc.
Accords to the standard ISO 6430 ISO6431 VDMA 24562 ISO15552 etc.
Used for standard cylinder, compact cylinder, mini cylinder, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper etc. Also for some special cylinders.
Chemical Composition:
|
Chemical Composition |
Mg |
Si |
Fe |
Cu |
Mn |
Cr |
Zn |
Ti |
|
0.81 |
0.41 |
0.23 |
<0.08 |
<0.08 |
<0.04 |
<0.02 |
<0.05 |
Specification:
| Tension Intensity (N/mm2) | Yield Strength (N/mm2) | Ductility (%) | Surface Hardness | Internal Diameter Accuracy | Internal Roughness | Straightness | Thickness Error |
| Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | < 0.6 | 1/1000 | ± 1% |
Torlerance Of Aluminium Alloy Tube:
| TORLERANCE OF ALUMINIUM ALLOY TUBE | ||||||
| Bore Size | TORLERANCE | |||||
| mm | H9(mm) | H10(mm) | H11(mm) | |||
| 16 | 0 | 0.043 | 0 | 0.07 | 0 | 0.11 |
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
SC Round Pneumatic Cylinder Tubing is especially designed for Standard Pneumatic Cylinder like Airtac SC pneumatic cylinder, and mini cylinder, like Airtac MAL mini pneumatic cylinder, use. ID from 16mm up to 320mm. Standard Stroke is 2000mm.
In addition to the assembly cylinders that can be used, 6063-T5 aluminum alloy has excellent processing properties, excellent weldability, extrudability and electroplating properties, and good corrosion resistance. It is also used for pipeline transportation and industrial processing.
In order to ensure the good operation of the pneumatic cylinder, good sealing performance, no air leakage, and long service life, there are strict requirements on the dimensional tolerance of the pneumatic cylinder tube, internal and external surface treatment, increase internal and external surface hardness, inside polishing, and anodizing.
FAQ
Q1:What is 6063 aluminum alloy
A:The main alloying elements are magnesium and silicon, which have excellent processing properties, excellent weldability, extrudability and electroplating properties, good corrosion resistance, toughness, easy polishing, color film, and excellent anodizing effects, which are typical Extruded alloy.
6063 aluminum alloy profiles are widely used in building profiles, irrigation pipes, vehicles, benches, furniture due to their good plasticity, moderate heat treatment strength, good welding performance, and gorgeous surface color after anodizing treatment. Tubes, rods and profiles used for, elevators, fences, etc.
Q2:What the biggest bore size and the smallest bore size
A:The biggest bore size of SC aluminum alloy cylinder anodized aluminium tube is IDφ320MM.The smallest bore size of SC cylinder air cylinder aluminum tubing is IDφ16MM.
Q3:Can you provide samples for testing
A:We are very willing to provide you with our samples, we have prepared enough samples for our customers to test
Q4:Can we customize the honed aluminum cylinder tubing according to the drawings provided by the customer?
A:We can open molds according to customers' requirements, and we have many models of tubes that are made according to customer requirements.
Q5:Are the standard specifications of your products in stock?
A:We have all the conventional models in stock, and we have a factory building as a warehouse
Q6:Why does Autoair have a cost advantage?
A:Our profiles are all extruded in our own factory, and the processing of aluminum extrusion pneumatic cylinder tubes is also done in our own factory, without intermediate transportation costs.
Q7:Why is Autoair's delivery time so fast?
A:Because we have stocks of most types of aluminum pneumatic cylinder aluminium profiles, our warehouse has an area of 1,000 square meters, and there are sufficient stocks of conventional types of aluminum pneumatic cylinder barrels.
Q8:What is the SC pneumatic cylinder?
A:It is Airtac standard model, It is also one of the most commonly used cylinders. Because of the simple manufacturing process and low production cost, it is very popular with consumers in the market.
Q9:Are there have any MOQ?
A:We don’t have MOQ for SC pneumatic cylinder, you can freely to choose any one.
Q10:What is the length of your SC aluminium profile tube?
A:The standard size of our SC cylinder tube is 2.2M, some sizes can choose to lengthen 2.4M
Q11:What is the packing?
A:Generally, we are packing by wooden case. It is avoid the damage for the tube.
We need to make sure the goods arrive your there with good condition.
Q12:Does your factory have its own anodizing equipment?
A:Yes, our factory has two pneumatic cylinder tube anodizing equipment, our pneumatic cylinder tube inner and outer walls are both anodized
Q13:Do you have aluminum extrusion equipment in your factory
A:Yes, Our factory has two heavy-duty aluminum extrusion equipment, which can extrude pneumatic cylinder aluminum profiles and aluminum bars, and can also open molds and extrude profiles according to customer requirements.
